ClearJet Liquid Laminate ® Solvent Base UV-Protective Coating
- Use Instead of Film Laminates
- Contains State-Of-The-Art UV Inhibitors
- High-Performance
- Highly-Flexible
- Waterproof
- Will Not Yellow
- Use On Digital Output: Solvent Based Ink, Electrostatic, Thermal, Pigmented Ink (non water-sensitive)
- Excellent for Non-Water-Sensitive Inks, Media, Materials, and Products
- Easy Clean-Up With Soap And Water
- Available In 4 Finishes: Gloss, Semi-Gloss, Matte, 200 Satin
- Packaging: Quarts, Gallons, Five-Gallon Pails, 55 Gallon Drums
ClearShield®: clear liquid laminate for non-water-sensitive ink/media combinations
ClearShield® is your first choice for all non-water-sensitive applications. We created ClearShield® using state-of-the-art resins and ultraviolet inhibitors that protect the substrate, ink, and the clear coating itself. These non-yellowing clear coatings have excellent exterior durability and are highly flexible.
Use ClearShield® on most substrates, including waterproof canvas, vinyl, banners, fiberglass, wood, metal, plastic, and paper. You can apply it over solvent-based inks and most water-based paint systems. ClearShield® is available in several versions. This chart gives you information about each product.
Version |
Properties |
How to Apply |
Finish |
ClearShield Original |
Thickest film build. Suitable for vertical applications. Recommended for Eco-Sol Inks. |
Spray, pad or foam applicator, roller. |
gloss
semi-gloss
matte
|
ClearShield Type LL |
Lower viscosity than original ClearShield. Same resin solids. Recommended for Eco-Sol Inks. |
Spray,automated application equipment, and hand application with roller, pad, or foam applicators and window "mops." |
gloss
semi-gloss
20° satin
matte |
ClearShield Type C |
Waterproof canvas applications (highly flexible). Also suitable for micro porous substrates to reduce or eliminate pinholes. |
Use all techniques, including most automated equipment. 30° is best applied by spray or liquid lamination equipment. |
gloss
semi-gloss
30° satin |
ClearShield VG
|
Vehicle graphics. Highly flexible and chemical resistant. |
Apply only on horizontal surfaces. Use all techniques, including most automated equipment. |
gloss only |
ClearShield 20° Satin LL |
Low gloss applications not requiring dead flat finish found in matte version. Better abrasion and mar resistance. Suitable for many wallpaper applications. |
Use all hand application techniques. For automated equipment, specify Type LL. |
20° satin |
ClearShield Anti-Graffiti Clear |
Highly flexible, chemical and uv resistant. Two-component, water-based clear coat easily cleaned with solvent or Clearstar's non-petrochemical citrus based cleaner. |
Use all techniques. Automated equipment requires reduction with water to working viscosity. |
gloss |
|
